46' Ford Pickup Rat Rod on S-10 Frame

What you see is what you get. Up for sale is a 1946 Ford Truck Pickup Cab sitting on a late model S-10 Frame. FRAME:Late Model S-10 Frame with disk brakes in the front and drum brakes in the rear. The frame has aftermarket Weld Racing Aluminum Wheels all the way around. Certain areas of the frame have minor spots of surface rust but NO rust holes that are through and through. The rear end is a GM 10-Bolt but I am unsure of the ring and pinion size. CAB:The cab is a 1946 Ford Pickup Truck. The glass will need to be replaced and it will also need a floor pan. The original seat is included with the truck but it will need to be recovered. There is NOT a gas tank with this truck but i can included a keg that can be fabricated to make a gas tank for it. completing the rat rod look. The cab is NOT currently secured to the frame by any means other than gravity. BED:The bed was made from hand by the person that I purchased it from. It has 6x6 cross supports running along the bottom of the bed. It has a set of tail lights and turn signals mounted at the rear of the bed. It is NOT currently mounted to the frame. TITLE:The most important part when it comes to these old vehicles. The title is free and clear of any liens or other hindrances. It is a TN title that is in MY name and reads 1946 Ford Truck. I will not split up the cab and frame or title to be sold separately. The vehicle is for sale locally and i reserve the right to end the auction early. Engine and Transmission:Included with the cab. bed. and frame is a Chevrolet 5. 7 350 short block and TH350 transmission. The engine is fresh from the machine shop and ready to be put back together. It was baked (150. 00) and bored . 030 over. The motor had more than 900. 00 of machine work done at the shop. the heads were checked and cleaned. the crankshaft was polished mic'd and cleaned. The new pistons were pressed onto the rods. It comes with a brand new rebuild kit from Nashville Internal Engine and includes everything you need to put it back together. The TH350 transmission will probably need a rebuild because I am unsure of its current condition. On Mar-31-15 at 17:17:21 PDT. seller added the following information:Engine pics and machine shop bill uploaded.