1990 Toyota Land Cruiser Turbo Diesel HDJ81 -- Triple Lockers and Factory Winch!

PLEASE IGNORE ABOVE VIN#. The correct VIN is HDJ81-0002695. This is the VIN assigned to the vehicle by the state of Arizona. This coincides with the VIN listed on the title as well as the frame of the vehicle. This disclaimer is required by eBay staff to protect buyers. This truck comes will full documentation dating back to it's original purchase in Japan, s well as full customs importation documents.

Imported from Japan approximately four months ago with 164,000 miles. I'm a huge Toyota enthusiast, nd enjoy restoring classic Toyota 4x4's in my spare time. The truck has been gone through completely while under my care, oth mechanically and cosmetically. It's important to understand that a few cosmetic flaws still remain, nd will be disclosed below.

You are bidding on a fully loaded 1990 Toyota Land Cruiser HDJ81 VX-Limited with factory electronic locking differentials, lectronic winch, ear tire carrier, nd refrigerator/icemaker. This truck was handpicked for it's considerably rust free body. It's important to understand that very few, f any, and Cruisers that come through Japanese Auto Auctions are 100% rust free. The vast majority of trucks exported, ome with a hefty amount of body and frame rust. This one is an exceptional example of a low rust HDJ81.

The truck has had a complete exterior respray utilizing DuPont materials. As the door jams were in near meticulous condition, saw no purpose in having these resprayed at nearly double the cost. All exterior trim was removed in order to be painted, o corners were cut. Now, he truck has received three coats of clear coat with the plan being to have the top coat removed during the color sanding process. As I imagine the future owner may have plans to take this vehicle off-road, saw no purpose in taking this step. For all I know, he future owner may incur some light surface scratches as a result of offroading. They would then be able to remove these scratches and have essentially a brand new surface.

The interior has been completely detailed and cleaned. The majority of surfaces in the truck look, nd feel, ike a new vehicle. The seats are in great condition, s they've been under seat covers since new. Brand new, ustom digital fit Weathertech floor liners were installed front and rear. A new Jensen Navigation unit with Bluetooth was also installed. The sound is run through a 4-channel 700 watt amp, nding up in aftermarket door speakers. All exterior windows have received Suntek Ceramic tint; 35% on the rear and sides, nd 55% on the front passenger and driver windows. The truck also features keyless entry and remote start; very handy for cold-weather climates. The truck comes with two sets of fobs and two keys. It's also important to point out that the boost gauge was fitted merely as a monitoring device. The truck is completely stock and unmolested underneath the hood. I'll let the next owner decide which power enhancement route they'd like to take.

Exterior plastics have been repainted using top of the line SEM trim paint. The JDM headlights have been replaced with high quality DEPO glass lens LHD headlights. They've also been retrofitted with a full HID projector setup, eaturing 55 watt DDM Tuning D2S projectors and 4300k bulbs. The light output is simply stunning and focused below oncoming driver's eyes-- making it very safe. The original, aded JDM wheels were replaced with near mint- condition 4th generation Toyota 4runner wheels. New Toyo Open Country ATII's in the 265/75/16 size were fitted. The 16" wheels allowed for modern brakes from a late model FJZ80/100 series to be fitted. This means new OEM rotors, EM pads, nd new calipers! Braking is hugely improved over the stock HDJ81.

The truck has received a massive amount of maintenance in the last four months. The infamous "Big End Bearings" aka BEB's were replaced per factory service manual specifications with high quality Taiho bearings and new OEM stretch bolts. Both front knuckles were completely rebuilt with high quality components. In addition, he wheel and trunion bearings were replaced with Koyo bearings. The tie rod ends, elay rod ends, nd lower control arm bushings were replaced with top end Moog components. All four shocks were replaced with brand new OEM units, s well as new pillow bushings. The oil was changed to Shell Rotella Synthetic 10w 30 and brand new OEM oil filter. A new OEM fuel filter was also installed, fter the injectors were isolated and ran using LiquiMoly Diesel Purge. Additionally, he cooling system has been flushed and replaced with Toyota Red LLC, n addition to a new OEM thermostat being fitted.

My goal with this truck was to create a superb base for a serious overlander. It was NOT to create a serious offroad beast, eighed down with a pallet full of aftermarket goodies. I instead sought to revive this truck and prepare it for a life of faithful touring. The fun part of owning this truck begins now. The future owner will be able to outfit to their liking, nd then conquer whatever this world can throw at them. The truck also has full service records, ating back to 1990, s well as full owners manual and factory service manual. Additionally, he truck is fully legal and registered here in Arizona. I've seen no issues with owners attempting to register their trucks in their states, ut of course standard disclaimer applies: it's up to the buyer to secure registration within their own state.

Repairs/Modifications/Updates(All components brand new)

Exterior

- Full exterior respray using DuPont materials

- 4th generation 4runner wheels (alternate wheels available)

- Toyo Open Country ATII 265/75/16 load range SL

- Depo glass headlights

- Depo surn signals

- Depo corner markers

- DDM Tuning HID projector retrofit (55w ballasts with 4300k bulbs)

- Repainted front grill using SEM Color Coat "Trim Black"

- Fully operational electronic winch w/ OEM Toyota winch controller

Suspension

- Moog L&R tie rod ends

- Moog L&R relay rod ends

- Moog lower control arm bushings

- CruiserSolutions knuckle and wheel bearing rebuild kit

- OEM (Tokico) shocks > all four corners

- Differential fluid flushed and changed

Interior

- Jensen VX7020 GPS stereo with Bluetooth

- SSL speakers front and rear door panels

- 4 channel, 00 watt amplifier mounted under passenger seat

- Reverse beeper bypassed

- Headlight reminder chime installed

- Boost gauge and pod installed for safety purposes only

- Weathertech Digital Fit floor liners (front and rear)

Engine

- Timing belt and water pump replaced at 139,000 miles

- Big end bearings replaced at 164,663 miles

- Fuel filter replaced at 165,000

- Thermostat replaced at 170,000

- Transmission fluid flushed at 165k, 67k, nd 170k miles. It's a 3 part process.

I am in the process of importing a few other Japanese 4x4's and am looking to make room in my rather modest garage. Hence the selling of this fabulous truck. In the interest of full disclosure, here are a few cosmetic issues still remaining with the truck. The automatic shift knob has worn down and will need replacing. The dash cover has a bulge from where a repair was attempted. The rear window frame has a small rust spot where water has pooled over the years. The front passenger interior door has rust along the bottom interior edge. This rust isn't noticeable unless you're on your knees however, nd was actually caused by a leaf that had lodged itself in the drain holes on the door. The leaf has been removed, nd the drain holes now function as intended.

The truck, owever, s flawless mechanically. Transmission shifts are firm and confident. Power is plenty, nd smoke is at a minimum. Steering has minimal effort, nd is smooth.