2001 Dodge Dakota Sport Crew Cab Pickup 4-Door 4.7L
2001 Dodge Dakota
Dodge Dakota 2001 technical specifications | |
---|---|
Item location: | Rocky Face, Georgia, United States |
Make: | Dodge |
Model: | Dakota |
Type: | Crew Cab Pickup |
Trim: | Sport Crew Cab Pickup 4-Door |
Year: | 2001 |
Mileage: | 251,894 |
VIN: | 1B7GL2AN81S199946 |
Color: | Brown |
Engine size: | 4.7L 287Cu. In. V8 GAS SOHC Naturally Aspirated |
Number of cylinders: | 8 |
Power options: | Cruise Control, Power Locks, Power Windows, Power Seats |
Fuel: | Gasoline |
Transmission: | Manual |
Drive type: | 4WD |
Interior color: | Brown |
Safety options: | Driver Airbag, Passenger Airbag |
Options: | Cassette Player, 4-Wheel Drive, Leather Seats |
Vehicle Title: | Clear |
You are interested? | Contact the seller! |
Description |
---|
This is an 01 quad cab Dakota that I have completely removed all of the drive train and replace it with gm components. It has a gm 350. sm 465 transmission with granny low. np 205 transfer case. and gm 10 bolt front and rear ends. I have installed Dakota digital speed sensor and convertor to make the speedometer correct. The factory oil pressure. battery. and gas gauge work. I have installed an after market temperature gauge. The truck started out as an automatic so the computer would not make the key hot so I installed a push button starter switch. There is no clutch safety switch. The emergency brake is not hooked up. Truck has a straight pipe all the way back to the factory tailpipe. I have a muffler that will go with the truck if you want to put it on. The truck had factory air. but the 350 does not have a compressor on it. All the factory ac components will go with the truck. The motor came out of a truck with about 80. 00 miles. Currently the passenger windows do not work with their switch. but they all go up and down with the driver's switch. I'm thinking it is the lock out switch on the driver's panel. I will check it out and update the post if I get the other switches working. I had the front of a gm truck frame cut out and welded and bolted together to the inside of the Dakota frame so all the factory motor. tranny. and front end mounts bolt right up. The spring perched has been moved to bolt to the factory location on the Dakota. The wheel base has been extended about 8 inches. On Apr-02-15 at 05:28:06 PDT. seller added the following information: The front and rear end are out of a m1009 military blazer. The m1009 run 3. 08 gears with a locker in the rear.