2008 Ram 3500 Pipeline Welding Rig

Perfect break-out rig for up and coming pipeline welder!

2007 ½ (2008) Ram 3500 Pipeline Welding Rig

- 6.7L Cummins

- G56 6 Speed Manual Trans.

- 393 Gears

- 4WD

- 2” leveling kit

- 229,492 Miles (subject to increase as I am currently still working out of this rig.

- Sale price is for truck and bed, welding machine, fuel tank, all tool boxes, oxy/act reel and hose, vice, hoosier pole, lead racks and leads (125’ each 1/0 ultra flex welding cable), and fifth wheel. No hand tools will accompany the rig.

- DPF delete

- PPEI by Corey Willis tuner installed

- 5” straight piped exhaust turbo-back

- 2” leveling kit

- 20” Fuel Wheels – no spacers – designed with offset allowing capability to run 38x12.50 tires W/O spacers!

- 34x11 Nitto Terragrapler tires still in excellent shape – better then 50% tread left.

- New shocks all the way around

- Bushwacker fender flares

- 16K Reese fifth wheel, rail mounted, bolted AND welded, reinforced with 3x6” rec. tubular with grade 8 bolts through it and reinforced with welds.

- 5K Firestone air bags under the back with air compressor, in-cab gauge and toggle! No manual airing these bags up with a air hose!

- 650HP Valair dual disc ceramic clutch

- New brakes and rotors all the way around

- Oil has been changed in this truck religiously every 7500 miles since it was brand new and the filter has been replaced every single oil change. Air filter changed every time indicator shows yellow.

- Transmission, front end, and rear end were all changed past winter and have always been changed and every regular recommended service interval.

- All U-joints in entire truck have been replaced at some point in time.

- Entire front end is completely new as of spring of 2015! New: ball joints, wheel bearings, tie-rod ends, steering box, steering stabilizer shocks, realignment. This truck drives STRAIGHT down the road with no more play in the steering then a new truck.

- I DO have a steering box stabilizer and adjustable caster arms new in the boxes from Sinister Diesel that need to be installed to keep from wearing out the new steering box that I just have not had time to get installed but WILL come with the truck if I don’t get them installed before I sell it.

- This cab of this truck looks immaculate because it is ALL new paint as of spring of 2015! This truck was NOT wrecked; it was in a hail storm and insurance paid for new hood/grill and all new paint. Installed new head light units at the same time, along with a ranch hand bullnose bumper complete with 26” LED light bar.

- All lights on the truck work.

- I will knock off $1000 from the price if the buyer does not want the Jobox triple slide box in the backseat and wants the back seat back in it.

- I would also consider selling ONLY the truck and bed if buyer was not interested the the whole rig.

- Welding machine is 2007 Lincoln Vantage 300. 2715 hours. Kubota I-3 diesel. Serviced every 250 hours. Includes wireless Tru-remote control. Has never had a problem, starts on first crank even in - degree weather.-

- Fuel filters changed every oil change. Machine welds great and has never had an issue or problem.

This truck does have nearly 230K miles on it but you couldn’t tell it if you drove it! It has been VERY well taken care of and maintained. This is a very solid truck and the motor is very strong. Doesn’t use any oil, or have any issues. It has ONLY been run in economy/tow mode since the tuner was put in and has never been hot rod’d or abused. This truck easily has another quarter million miles left in it if maintenance is continued like it has been since it was new. This truck is rigged out for traveling! 90 gallon RDS Mfg. aluminum tank hard wired with 15 gpm pump. Ram mount lap top stand/holder, multi-point 12V power outlets, A/C inverter hardwired, Cobra29 CB radio.