1985 Ford F250 4WD extended cab pickup. As you can see by the pics the panels do not match. My son and I purchased this truck several months ago with the plan to make some repairs and flip it to help pay for him a truck when he starts driving in a year. It has went well but I found him a truck that will be the one he drives when it is finished and Idon't have room for to many projects. The truck runs great and cranks easy. It has the 5.8 V8. The tranny works well and the 4wd works good. The front of the truck was a little rough when we bought it so wepurchased a complete front end that was used and two doors. Its obvious by the pics the colors do not match. We have the original panels if you want them but if youdon't I will haul them to the scrap yard.Here is what I know the truck needs. It needs a drivers side rear wheel cylinder (yes its leaking) Mepersonally I would replace both. It also needs the detent rod hooked up to the carb. It has a edelbrock carb which is not factory and it needs the bracket to hook it up. These can bepurchased or fabricated. The passenger side door has a bent lock bar inside the door (thats why the panel is off but its in the truck) it needs to be straightened or replaced. There is one in the old door. It also needs mirrors mounted to the door. The old mirrors do not match theexisting holes but the old mirrors are on the old doors. Paint and someupholstery work and the truck will not be to bad. It issolid and yes it has dings and scrapes all over. If you need a good farm truck then here it is. If you want a parts truck then here it is. If you want to spend very little cash and rattle can some camo on it and have a bad ass mud or hunting truck then here it is. If you want to talk in person then shoot me your number and a good time to call and I will give you a call. Please feel free to ask any and all questionsbefore you bid. Shipping is up to the buyer. I would trailer it because of the wheelcylinder but it can be driven but it leaks brake fluid.