1974 Ford Bronco rebuilt 302 and c4 trans
1974 Ford Bronco
Ford Bronco 1974 technical specifications | |
---|---|
Condition: | Used |
Item location: | Cape May, New Jersey, United States |
Make: | Ford |
Model: | Bronco |
Type: | SUV |
Trim: | Base Sport Utility 2-Door |
Year: | 1974 |
Mileage: | 85,000 |
Color: | green |
Engine size: | 5.0L 4949CC 302Cu. In. V8 GAS OHV Naturally Aspirated |
Number of cylinders: | 8 |
Fuel: | Gasoline |
Transmission: | 3 speed c4 |
Drive type: | FWD |
Interior color: | black and grey |
Options: | 4-Wheel Drive, CD Player, Convertible, Leather Seats |
Vehicle Title: | Clear |
You are interested? | Contact the seller! |
Description |
---|
For sale I have a 1974 Ford bronco. There are less than 10k miles on the rebuilt original 302. in 2013 the original manual transmission was replaced with a built C4 pan fill truck transmission. I really don't know the mileage, he odometer reads like 85,000.
Engine:
New work (2013-14)
bored 0.030 over
9.5:1 compression
new: pistons, ings, earings, reeze plugs, il pump, am, ifters, igh flow water pump, tc. I have all receipts. I used the best parts I could get.
Heads were rebuilt locally with new valves, eals, nd springs.
Edelbrock performer intake and carb (500 cfm)
Rebuilt and recurved electronic distributor. New coil, ew voltage regulator and ignition box.
Stainless steel exhaust system (behind blue/rusty James Duff headers) with magnaflow mufflers.
Electrical work was done but not 100 percent finished. Converted mechanical fuel pump to electric.
Trans:
2012 (15k miles ago) C4 truck trans, ed clutches, ard shifting. Trans cooler since new. New torque converter. BK Broncos kick down cable and throttle cable. Drive shafts have new (2012-14) u-joints/CV joint.
Interior:
Rebuilt gauge cluster with new voltage regulator, ed panel lights, ecals, nd amp gauge converted to volts gauge, ew speedo cable, peedo is accurate. Rino lined interior (maybe the floor pans were replaced before I bought the truck?). Center console with Sony stereo, oll bar with speakers - name brand forget which, ear seat is maybe from a jeep? Was converted to AC (not by me) but AC does not work and mostly is uninstalled. Heat works and have original heater box and new heater core (installed core works). Nice seats. Dash is cracked the way they always crack. New head light switch plus converted to relay. LED interior lights.
Rears:
Front Dana 44 (original) has 4.10 gears, locker, nd was converted to disk breaks (2012). Also new wheel bearings and new u-joints, nd hub locks. Rear Ford 9" (original) has 4.10 gears, nd a locker.
Doors:
Rebuilt in 2012 with new seals, lastic parts, eather stripping, nd locks that are keyed alike. Doors are a little rusty at the bottom. They have lift off hinges and don't shut too well.
Other parts:
New main fuel tank (25 gal? - its BIG) 2012. Has working Aux tank but fuel gauge doesn't work. Wild horses 2.5 lift - long ago, onverted to power steering belt is off but steering works great. New shock absorbers and tires (BFG 33 12.5 all-terrain) were installed less than 15K miles ago. Many other parts have been replaced! Warren 9000 lb winch works (except free spool).
Have nice Best-top soft top and doors.
Radiator leaks but is ok to drive around a little. Starts and runs great. Needs some love before its drive regularly.
Engine:
New work (2013-14)
bored 0.030 over
9.5:1 compression
new: pistons, ings, earings, reeze plugs, il pump, am, ifters, igh flow water pump, tc. I have all receipts. I used the best parts I could get.
Heads were rebuilt locally with new valves, eals, nd springs.
Edelbrock performer intake and carb (500 cfm)
Rebuilt and recurved electronic distributor. New coil, ew voltage regulator and ignition box.
Stainless steel exhaust system (behind blue/rusty James Duff headers) with magnaflow mufflers.
Electrical work was done but not 100 percent finished. Converted mechanical fuel pump to electric.
Trans:
2012 (15k miles ago) C4 truck trans, ed clutches, ard shifting. Trans cooler since new. New torque converter. BK Broncos kick down cable and throttle cable. Drive shafts have new (2012-14) u-joints/CV joint.
Interior:
Rebuilt gauge cluster with new voltage regulator, ed panel lights, ecals, nd amp gauge converted to volts gauge, ew speedo cable, peedo is accurate. Rino lined interior (maybe the floor pans were replaced before I bought the truck?). Center console with Sony stereo, oll bar with speakers - name brand forget which, ear seat is maybe from a jeep? Was converted to AC (not by me) but AC does not work and mostly is uninstalled. Heat works and have original heater box and new heater core (installed core works). Nice seats. Dash is cracked the way they always crack. New head light switch plus converted to relay. LED interior lights.
Rears:
Front Dana 44 (original) has 4.10 gears, locker, nd was converted to disk breaks (2012). Also new wheel bearings and new u-joints, nd hub locks. Rear Ford 9" (original) has 4.10 gears, nd a locker.
Doors:
Rebuilt in 2012 with new seals, lastic parts, eather stripping, nd locks that are keyed alike. Doors are a little rusty at the bottom. They have lift off hinges and don't shut too well.
Other parts:
New main fuel tank (25 gal? - its BIG) 2012. Has working Aux tank but fuel gauge doesn't work. Wild horses 2.5 lift - long ago, onverted to power steering belt is off but steering works great. New shock absorbers and tires (BFG 33 12.5 all-terrain) were installed less than 15K miles ago. Many other parts have been replaced! Warren 9000 lb winch works (except free spool).
Have nice Best-top soft top and doors.
Radiator leaks but is ok to drive around a little. Starts and runs great. Needs some love before its drive regularly.