1965 FORD MUSTANG BASE COUPE VERY NICE!!!
1965 Ford Mustang
Ford Mustang 1965 technical specifications | |
|---|---|
| Condition: | Used |
| Item location: | Memphis, Tennessee, United States |
| Make: | Ford |
| Model: | Mustang |
| Type: | Coupe |
| Trim: | PONY |
| Year: | 1965 |
| Mileage: | 42,860 |
| Color: | Red |
| Engine size: | 170 INLINE 6 |
| Number of cylinders: | 6 |
| Fuel: | Gasoline |
| Transmission: | Manual |
| Drive type: | RWD |
| Interior color: | Black |
| Options: | Cassette Player, Leather Seats |
| Vehicle Title: | Clear |
| You are interested? | Contact the seller! |
Description |
|---|
ONE OF THE NICEST AND LEAST EXPENSIVE ON eBay!! A DEAL FOR THE LAST BIDDER!!!
You are considering a 1965 Ford Mustang Pony 170 inline 6 cylinder hard top coupe that is 100% FUNCTIONAL-DRIVES-AND PURRS!
FREELY MOVE WHILE YOU IMPROVE THIS GARAGE KEPT-NON SMOKER OWNED GORGEOUS VEHICLE!!!!!EXPERIENCE THAT ANTIQUE CAR SMELL!!
MOST ALL THE WORK/UPGRADES HAVE BEEN COMPLETED. IT DOES DRIVE WELL, UT STILL NEEDS A LITTLE MORE WORK. THIS IS A GREAT, OLID, OUND ANTIQUE VEHICLE THAT YOU CAN DRIVE WHILE YOU UPGRADE!! IT GETS GREAT GAS MILEAGE TO BE SO ANCIENT!!
UPGRADES, ARTS REPLACED, URRENT LABOR(S): Recent (Less than a year) drum replacement; fuel sending unit; new tires; clutch pressure plate; starter coil; electronic ignition conversion-NO POINTS TO SET!! (Pertronix); entirely updated cooling system including: aluminum radiator, ater pump/pulley, hermostat housing, hermostat (original 192 degree-I installed a new 180 degree, pper & lower radiator hoses, ll new clamps, emperature sending switch, pgraded from 4 to 6 blade cooling fan; fresh antifreeze; ALSO new belt, ew alternator, lternator mounting bracket; new voltage regulator; new battery with two year replacement; new stainless steel fuel pump to carburetor fuel line; new high temperature auto choke vacuum line; new radiator/hood bumper kit; new trunk gasket, ew trunk bumper cushions; new trunk carpeting; new trunk wheel housing gaskets; new spare tire wheel cover for trunk's clean sleek look; new pcv valve & hose; new breather gasket; new air filter; replaced grill (was 1966 turned back to original 1965 with grill bars & support bracket); new glove box light fixture (was missing from vehicle); replaced plugs; plug wires; distributor cap/ignition rotor; replaced starter coil/coil bracket/coil wire; set timing; replaced battery tray; installed new 13 oz stainless steel radiator backup reservoir; replaced missing under the hood wire harnesses; replaced floor mats with original red rubber pony mats back & front; added racing steering wheel cover; added protective dash mat to prevent cracking/sun damage; added red/black interior racing front seat covers to protect interior front seats; replaced with new accelerator pedal spring/screw,new starter solenoid with FOMOCO logo, ew starter.
PARTS ON HAND (COME WITH CAR) THAT REMAIN UNINSTALLED: Ford chromed steel permanent pin lettering (for hood/trunk/body); stainless steel distributor to carburetor vacuum line (needs flaring & slight bend adjustment then installation); dual cup master brake cylinder with quick fit fluid line adapters for the conversion; interior dash lighter heating element; brake pedal light switch (all lights-fully functional!); extra new in box pcv valve!!
AREAS NEEDING WORK/ATTENTION--SOON (in my humble opinion): Brake/clutch pedals need at least new return springs; dual cup master brake cylinder upgrade (on hand); temp switch may be incorrect ohm count to trigger gauge reading-CAR IS NOT RUNNING HOT-IT'S A GREAT CRUISER; trunk torsion rods (trunk will not stay open by itself although there is a pair present); horn works but may need springs; blender air cable; lug wrench.
SUMMATION: I have done my best to disclose everything about this vehicle that I know. I am no mechanic, ut I did much study online to assure I was not getting robbed and install the simple things myself. It runs and drives well. It is after all 50 years old and does NOT drive like a new one!!! Feel free to ask any questions. If I can answer-I will!! I am only seeking to retrieve most of what I have invested in this vehicle, tarting the bidding at a slight loss. Please do NOT message me with a low ball offer that only would offend. This is a fully operational vehicle that is quite attractive. I will keep it before I lose too much on my investment. It is fun to drive. All the time I get compliments and dropping jaws! I would love to drive it with many more modifications, ut do not have the time as I work 3 jobs and have 3 children. You can move while you improve and create your dream "stang" as you so desire! There are not many of these vehicles left that are this "vested". This one is a winner and had been well cared for, ot smoked in, nd remains in my garage, HANKS FOR LOOKING!!
ARRANGEMENTS FOR PAYMENT/PICKUP: Buyer will be asked to pick up within 7 days (unless another agreement is reached in advance.), ay U.S.D. non-refundable $250.00 deposit upon winning the bid (or within 24 hours to show legitimacy); contacting me (via ebay message) to inform of intentions and agree on time/date of pickup within 48 hours of auction's end. I will work with you any way I can. If future arrangements are needed-they must be purchased in good faith. I have a pretty extensive feedback record on Ebay and have experience with vehicle sales and arrangements. I am NOT hard to deal with provided you have an ounce of professional courtesy and integrity, hank you for looking!!! GOOD LUCK!!
You are considering a 1965 Ford Mustang Pony 170 inline 6 cylinder hard top coupe that is 100% FUNCTIONAL-DRIVES-AND PURRS!
FREELY MOVE WHILE YOU IMPROVE THIS GARAGE KEPT-NON SMOKER OWNED GORGEOUS VEHICLE!!!!!EXPERIENCE THAT ANTIQUE CAR SMELL!!
MOST ALL THE WORK/UPGRADES HAVE BEEN COMPLETED. IT DOES DRIVE WELL, UT STILL NEEDS A LITTLE MORE WORK. THIS IS A GREAT, OLID, OUND ANTIQUE VEHICLE THAT YOU CAN DRIVE WHILE YOU UPGRADE!! IT GETS GREAT GAS MILEAGE TO BE SO ANCIENT!!
UPGRADES, ARTS REPLACED, URRENT LABOR(S): Recent (Less than a year) drum replacement; fuel sending unit; new tires; clutch pressure plate; starter coil; electronic ignition conversion-NO POINTS TO SET!! (Pertronix); entirely updated cooling system including: aluminum radiator, ater pump/pulley, hermostat housing, hermostat (original 192 degree-I installed a new 180 degree, pper & lower radiator hoses, ll new clamps, emperature sending switch, pgraded from 4 to 6 blade cooling fan; fresh antifreeze; ALSO new belt, ew alternator, lternator mounting bracket; new voltage regulator; new battery with two year replacement; new stainless steel fuel pump to carburetor fuel line; new high temperature auto choke vacuum line; new radiator/hood bumper kit; new trunk gasket, ew trunk bumper cushions; new trunk carpeting; new trunk wheel housing gaskets; new spare tire wheel cover for trunk's clean sleek look; new pcv valve & hose; new breather gasket; new air filter; replaced grill (was 1966 turned back to original 1965 with grill bars & support bracket); new glove box light fixture (was missing from vehicle); replaced plugs; plug wires; distributor cap/ignition rotor; replaced starter coil/coil bracket/coil wire; set timing; replaced battery tray; installed new 13 oz stainless steel radiator backup reservoir; replaced missing under the hood wire harnesses; replaced floor mats with original red rubber pony mats back & front; added racing steering wheel cover; added protective dash mat to prevent cracking/sun damage; added red/black interior racing front seat covers to protect interior front seats; replaced with new accelerator pedal spring/screw,new starter solenoid with FOMOCO logo, ew starter.
PARTS ON HAND (COME WITH CAR) THAT REMAIN UNINSTALLED: Ford chromed steel permanent pin lettering (for hood/trunk/body); stainless steel distributor to carburetor vacuum line (needs flaring & slight bend adjustment then installation); dual cup master brake cylinder with quick fit fluid line adapters for the conversion; interior dash lighter heating element; brake pedal light switch (all lights-fully functional!); extra new in box pcv valve!!
AREAS NEEDING WORK/ATTENTION--SOON (in my humble opinion): Brake/clutch pedals need at least new return springs; dual cup master brake cylinder upgrade (on hand); temp switch may be incorrect ohm count to trigger gauge reading-CAR IS NOT RUNNING HOT-IT'S A GREAT CRUISER; trunk torsion rods (trunk will not stay open by itself although there is a pair present); horn works but may need springs; blender air cable; lug wrench.
SUMMATION: I have done my best to disclose everything about this vehicle that I know. I am no mechanic, ut I did much study online to assure I was not getting robbed and install the simple things myself. It runs and drives well. It is after all 50 years old and does NOT drive like a new one!!! Feel free to ask any questions. If I can answer-I will!! I am only seeking to retrieve most of what I have invested in this vehicle, tarting the bidding at a slight loss. Please do NOT message me with a low ball offer that only would offend. This is a fully operational vehicle that is quite attractive. I will keep it before I lose too much on my investment. It is fun to drive. All the time I get compliments and dropping jaws! I would love to drive it with many more modifications, ut do not have the time as I work 3 jobs and have 3 children. You can move while you improve and create your dream "stang" as you so desire! There are not many of these vehicles left that are this "vested". This one is a winner and had been well cared for, ot smoked in, nd remains in my garage, HANKS FOR LOOKING!!
ARRANGEMENTS FOR PAYMENT/PICKUP: Buyer will be asked to pick up within 7 days (unless another agreement is reached in advance.), ay U.S.D. non-refundable $250.00 deposit upon winning the bid (or within 24 hours to show legitimacy); contacting me (via ebay message) to inform of intentions and agree on time/date of pickup within 48 hours of auction's end. I will work with you any way I can. If future arrangements are needed-they must be purchased in good faith. I have a pretty extensive feedback record on Ebay and have experience with vehicle sales and arrangements. I am NOT hard to deal with provided you have an ounce of professional courtesy and integrity, hank you for looking!!! GOOD LUCK!!












1965 HONDA S600 COUPE
1977 Ford Mustang II (Not base or clone, this was '77 Cobra II add-on package)
1965 Ford Thunderbird project car
1965 FORD MUSTANG FASTBACK SHELBY GT350 GT-350 R GT 350 RECREATION
honda civic EX coupe -- Nice sporty car
1965 Honda S600 coupe...... 47K miles....RUNNING, SHIFTING AND DRIVING CAR!!!