International Harvester: Scout II 1964 with Extras - Runs
1964 International Harvester Scout
International Harvester Scout 1964 technical specifications | |
|---|---|
| Condition: | Used |
| Item location: | Augusta, Georgia, United States |
| Make: | International Harvester |
| Model: | Scout |
| Trim: | 2-door |
| Year: | 1964 |
| Mileage: | 34,354 |
| VIN: | FC103209A |
| Engine size: | 2.5L 4 Cylinder Gasoline |
| Drive type: | RWD |
| Options: | Cassette Player |
| Vehicle Title: | Clear |
| You are interested? | Contact the seller! |
Description |
|---|
Overview: This truck is remarkably stock. As far as I know its been barn kept most of its life. It was freshened up around 2001 but remained inside a barn for 6 years (2007). It was bought and left untouched for 4 years and resold around 2011. The new owners had it for 2.5 years and only managed to touch the fuel line. I bought it in 2013 and have invested roughly $2,000 and countless hours looking for parts.
When I bought the Scout, e didn't know my wife had just become pregnant. We had our son, had shoulder surgery and next thing I knew I'd been sitting on the truck for a few years with no progress made. The last thing I want is for it to just rust away in my backyard until one day no one can enjoy the thing.
Motor: 152ci 4-cyl
Runs and is drivable. IH 152 weighs 2lbs less than a chevy 350 and from what I have read about them are pretty solid due to how much metal they invested in the block. Rebuilt carburetor with holley rebuild kit. Some smoking on start up from the exhaust manifold, ut goes away after its been running for a few minutes. Not much power, ut nice to putt around town. Loads of room under the hood for a motor swap.
Transmission: Stock 3 speed. I replaced slave cylinder and transmission fluid.
Rear Axle: Replaced gasket, luid, nd cleaned.
Brakes: Replaced all break line, rake cylinders, nd brake shoes. Still has single reservoir master cylinder. Also have the rotor removal tool for the rear wheels. $110 tool.
Tires: New, ever been on the road. I paid roughly $550 for the four, ounted and balanced. I move the truck around the yard every few months.
Body: When I got the truck it had a bright red "shade tree" paint job done to it. I wanted to see what they were trying to cover up and stared stripping down the paint. I found the body was extremely solid. I've seen some bondo nightmares hidden under re-sale red paint, ut the truck is very straight. The black paint I used was Bright Touch BP50. I just wanted one solid color as I tinkered on it.
Rust:
Cab floor. Used fiberglass to patch the main rot spots. Idea was to coat the floor in bedliner when done. Rusted out where the body meets the floor next to clutch pedal. Punched a hole through what I could with a screw driver. Really wanted to see where the issues were.
Doors. On the drivers-side there's a hole near the bottom. On the passenger-side the bottom of the door is rusted out. Everything can be repaired with some sheet metal. Nothing shows on the exterior when the doors are closed.
Body. Some bubbling and rust infront of and behind the driver-side door.
Tailgate. The bottom of the tailgate is starting to bubble.
Exhaust. Its not great. Some exhaust gets in the cab.
Additions:
Steering Wheel: Grant. Biggest one I could find. The original one was cracked and had been drilled out more than once. Fixed the turn signals while I was in the steering wheel. No Horn
Fuel Filter: The fuel line needs a redo. The previous owners made a very slap dash addition to the fuel system. Not proud of it, ut never got around to fixing it.
Alternator: The Scout has been converted to alternator but the positive/negative cables are still original, o they're backwards.
Cassette Player: No clue. The clock comes on. Had to take it out to replace a fuse.
License Plate Light: Replaced the fixture.
Known Issues:
Plastic Spacer for head lamp sprung out and got lost. Can easily fabricate another one. Just a little piece of plastic.
No heater core and it has been bypassed. Heat pipe running to the vents is dry rotted and needs to be replaced.
Fuel filter placement is just hanging out under the hood. Needs to be changed. But it works.
Wipers need to be converter to electric. Had the old vacuum ones on it and they were toast. Bought two new marine wiper motors as suggested on the forums. $110 each. Was in the middle of mounting them before my shoulder surgery and that's when I called it quits on the truck.
Missing Bolts here and there. Nothing uncommon.
Extras Included:
Window Gasket
Door Gasket
Wiper Motors
Rotor Puller
Bed Liner Roll On Kit
I don't know what's up with the mileage. Title says 45,500, dometer says 34,354.
When I bought the Scout, e didn't know my wife had just become pregnant. We had our son, had shoulder surgery and next thing I knew I'd been sitting on the truck for a few years with no progress made. The last thing I want is for it to just rust away in my backyard until one day no one can enjoy the thing.
Motor: 152ci 4-cyl
Runs and is drivable. IH 152 weighs 2lbs less than a chevy 350 and from what I have read about them are pretty solid due to how much metal they invested in the block. Rebuilt carburetor with holley rebuild kit. Some smoking on start up from the exhaust manifold, ut goes away after its been running for a few minutes. Not much power, ut nice to putt around town. Loads of room under the hood for a motor swap.
Transmission: Stock 3 speed. I replaced slave cylinder and transmission fluid.
Rear Axle: Replaced gasket, luid, nd cleaned.
Brakes: Replaced all break line, rake cylinders, nd brake shoes. Still has single reservoir master cylinder. Also have the rotor removal tool for the rear wheels. $110 tool.
Tires: New, ever been on the road. I paid roughly $550 for the four, ounted and balanced. I move the truck around the yard every few months.
Body: When I got the truck it had a bright red "shade tree" paint job done to it. I wanted to see what they were trying to cover up and stared stripping down the paint. I found the body was extremely solid. I've seen some bondo nightmares hidden under re-sale red paint, ut the truck is very straight. The black paint I used was Bright Touch BP50. I just wanted one solid color as I tinkered on it.
Rust:
Cab floor. Used fiberglass to patch the main rot spots. Idea was to coat the floor in bedliner when done. Rusted out where the body meets the floor next to clutch pedal. Punched a hole through what I could with a screw driver. Really wanted to see where the issues were.
Doors. On the drivers-side there's a hole near the bottom. On the passenger-side the bottom of the door is rusted out. Everything can be repaired with some sheet metal. Nothing shows on the exterior when the doors are closed.
Body. Some bubbling and rust infront of and behind the driver-side door.
Tailgate. The bottom of the tailgate is starting to bubble.
Exhaust. Its not great. Some exhaust gets in the cab.
Additions:
Steering Wheel: Grant. Biggest one I could find. The original one was cracked and had been drilled out more than once. Fixed the turn signals while I was in the steering wheel. No Horn
Fuel Filter: The fuel line needs a redo. The previous owners made a very slap dash addition to the fuel system. Not proud of it, ut never got around to fixing it.
Alternator: The Scout has been converted to alternator but the positive/negative cables are still original, o they're backwards.
Cassette Player: No clue. The clock comes on. Had to take it out to replace a fuse.
License Plate Light: Replaced the fixture.
Known Issues:
Plastic Spacer for head lamp sprung out and got lost. Can easily fabricate another one. Just a little piece of plastic.
No heater core and it has been bypassed. Heat pipe running to the vents is dry rotted and needs to be replaced.
Fuel filter placement is just hanging out under the hood. Needs to be changed. But it works.
Wipers need to be converter to electric. Had the old vacuum ones on it and they were toast. Bought two new marine wiper motors as suggested on the forums. $110 each. Was in the middle of mounting them before my shoulder surgery and that's when I called it quits on the truck.
Missing Bolts here and there. Nothing uncommon.
Extras Included:
Window Gasket
Door Gasket
Wiper Motors
Rotor Puller
Bed Liner Roll On Kit
I don't know what's up with the mileage. Title says 45,500, dometer says 34,354.
Beautiful Green 1999 Mitsubishi 3000GT 1999 Automatic lots of extras runs great
RARE 1974 International 200 4x4, 3/4 ton, Long Bed, Standard Cab, 79k Miles
2010 Mitsubishi Lancer GTS FULLY LOADED !!! LOW MILES !!!! TON OF EXTRAS
1964 Chevrolet 4 door Impala
1964 Pontiac Lemans Muscle Car GTO family
1964 Ford Galaxie 500XL Convertible Excellent Condition Driver
1964 Cadillac Eldorado Convertible, Black, Red interior Stored close to 30 years
1964 ranchero 427ci windsor brodix heads stroker drag race 6.0 in 1/8 NO RESERVE
1960 Chevy Impala bubbletop coupe 1958 1959 1961 1962 1963 1964 1965
1995 Mitsubishi 3000GT SL, White, Runs