1999 Porsche 911 996 CARRERA TRACK CAR - SPEC 996 / GTB-1 CLASS / NASA WINNER
1999 Porsche 911
Porsche 911 1999 technical specifications | |
|---|---|
| Condition: | Used |
| Item location: | Pompano Beach, Florida, United States |
| Make: | Porsche |
| Model: | 911 |
| Type: | Coupe |
| Trim: | Carrera Coupe 2-Door |
| Year: | 1999 |
| Mileage: | 90,000 |
| VIN: | WP0AA2999XS622013 |
| Color: | SILVER |
| Engine size: | 3.4L 3400CC H6 GAS DOHC Naturally Aspirated |
| Number of cylinders: | 6 |
| Fuel: | Gasoline |
| Transmission: | 6 SPEED MANUAL |
| Drive type: | RWD |
| Interior color: | SILVER |
| Safety options: | Anti-Lock Brakes |
| Vehicle Title: | Clear |
| You are interested? | Contact the seller! |
Description |
|---|
1999 PORSCHE 996 CARRERA TRACK CAR
This is a 1999 Porsche 911 Carrera that has been fully converted for track use and club racing. The build started with a perfectly clean 99' Carrera aimed towards a Spec 996 / GTB-1 competitor. It is a clean tub with no prior accident history or any on track incidents. The build to a full track purpose vehicle was started and completed in late 2013 / early 2014. It won 2014 NASA points championship in it's class and multiple podiums in PCA and SCCA events. The car currently competes in GTB-1 in PCA club racing but with some minor modifications it can be converted to a competitive Spec 996 racer. Fastest lap time at Sebring full course clocked at 2:19 with current owner.
The vehicle currently has the following options:
-Complete 3.4L engine rebuild by TuneRS in 2014
-New 6 speed transmission installed in 2015
-Direct Oil Feed (DOF) system with IMS bearing (installed 2014)
-3 quart high pressure accusump with check valve
-6 point tig welded chromoly roll cage, .75"x.095"
-MOMO Daytona race seat
-MOMO quick release steering wheel with NRG quick release
-OMP 6 point harness (hans friendly)
-Driver window net and center safety net
-Numeric Racing short shifter with Rennline shift base rasier
-Rennline pedals with rubber grips and adjustable blip throttle pedal
-Rennline floor panels
-TRS lightweight fiberglass rocker panels
-Getty design fiberglass 996 GT3 rear decklid, prights and wing blade
-Enkei 18x8 ET50 front wheels, 8x10 ET60 rear wheels (7mm spacers front & rear)
-3 sets of wheels (1 set with slicks)
-Fabspeed xpipe exhaust with muffler bypass
-K&N high flow air intake
-Semi-solid motor mounts
-Start/stop with master kill switch and two switch panel
-Racing wheel studs & nuts (extended)
-Pagid racing yellow brake pads with ATE slotted brake discs
-Sabelt 5.2L extinguisher system
-Coolsuit system installed
-4 point rear adjustable sway bar with tarett drop links
-5 point front GT3 adjustable sway bar with tarett drop links
-Sachs racing 996 GT3 cup coil over suspension with piggyback canisters front & remote canisters rear
-GT3 lower adjustable control arms front and rear
-TRS rear adjustable toe control arms
-Aerocatch quick release panels on front bonnet and rear trunk lid
-Vehicle weight (with 1/2 tank of fuel and NO driver): 2,754
-Many service records and build sheets dating back to 2011 available













1991 Porsche 964 Carrera 2 Coupe 911 for Street and Track
Carrera Cup Race Car 3.8 Twin Plug GT Road Racing Track NASA SCCA RSR GT3 RS 993
1974 Porsche 911 2.7 US Carrera Coupe, #296 of 528 US SPEC FULLY RESTORED!
1999 Porsche 911 Carrera 4