2013 Harley Davidson Switchback FDL

Original owner, ought new from dealer. Has aftermarket exhaust with fuel management system. Has been on dyno by Harley Davidson dealer. Aftermarket air cleaner, ftermarket hand grips with throttle boss. Engine guard with foot pegs. Has plug to charge phone and also usb plugin. Has removable sissy bar with backrest. Very low miles for the year and in very good condition. Reserve well below book value. Great bike just need to get rid of to eliminate payments. Pickup preferred but possibly will consider shipping at buyers expense. Easily convertible from cruising to touring, t's like two bikes in one, ith no compromises...

The Dyna® Switchback™ is custom touring motorcycle with detachable hard saddlebags and quick-detach windshield. Remove those components in just seconds to turn the Switchback into a custom street cruiser. Chassis, uspension and tires are engineered to deliver light, onfident handling.

The Switchback is the lightest custom touring motorcycle in its displacement category. Its styling evokes a classic proportion and clean, traightforward lines. The bend of the mini-ape handlebar and its pull-back riser combine with full-length rider footboards and a two-up touring seat to offer most Switchback riders all-day comfort.

DIMENSIONS
Length 92.9 in. (2360 mm)
Overall Width 36.6 in. (930 mm)
Overall Height 54.5 in. (1385 mm)
Seat Height:
o Laden2 26.1 in. (663 mm)
o Unladen 27.4 in. (695 mm)
Ground Clearance 4.3 in. (110 mm)
Rake (steering head) 29.9°
Fork Angle 28.9°
Trail 5.8 in. (148 mm)
Wheelbase 62.8 in. (1595 mm)

Tires (Dunlop® Harley-Davidson® Series, ias blackwall front and rear):
o Front - Dunlop® D402F 130/70B18 63H
o Rear - Dunlop® D401 160/70B17 73H

Fuel Capacity 4.7 gal. (17.8 L) (warning light at approximately 0.9 gal.)
Oil Capacity (w/filter) 3 qts. (2.8 L)
Transmission Capacity 1 qt. (.95 L)
Primary Chain Case Capacity 1 qt. (.95 L)

Weight:
o As Shipped 696 lbs. (316 kg)
o In Running Order 718 lbs. (326 kg)
o Gross Vehicle Weight Rating 1170 lbs. (531 kg)
o Gross Axle Weight Rating:
o Front 455 lbs. (206 kg)
o Rear 794 lbs. (360 kg)

ENGINE
Engine Air-cooled, win Cam 103™
Valves Pushrod-operated, verhead valves with hydraulic, elf adjusting lifters; two valves per cylinder
Bore x Stroke 3.875 in. x 4.38 in. (98.4 mm x 111.3 mm)
Displacement 103 cu. in. (1690 cc)
Compression Ratio 9.6:1
Fuel System3 Electronic Sequential Port Fuel Injection (ESPFI)
Air Cleaner Fiberglass media, ashable
Lubrication System Pressurized, ry-sump

DRIVETRAIN
Primary Drive Chain, 4/46 ratio
Final Drive Belt, 2/66 ratio
Clutch Multi-plate, et
Transmission 6-speed Cruise Drive®

Gear Ratios (overall): U.S.
o 1st 9.311
o 2nd 6.454
o 3rd 4.793
o 4th 3.882
o 5th 3.307
o 6th 2.79

CHASSIS
Frame Mild steel, ubular frame; rectangular section backbone; stamped, ast, nd forged junctions; forged fender supports; MIG welded
Swingarm Mild steel, ectangular tube sections backbone; stamped junctions; MIG welded
Front Forks 41.3 mm fork with 20 mm cartridge damping and triple rate spring
Rear Shocks Nitrogen charged 36 mm monotube damper with 5 step preload adjustable dual rate spring

Wheels4: Black, -spoke Cast Aluminum with highlighted rim
o Front 18 in. x 3.5 in. (457 mm x 89 mm)
o Rear 17 in. x 4.5 in. (432 mm x 114 mm)

Brakes:
o Caliper Type 4-piston fixed front, nd 2-piston torque-free floating rear
o Rotor Type (diameter x width): Patented, niform expansion rotors (floating, ront only)
o Front (floating) 11.8 in. x .2 in. (300 mm x 5.1 mm)
o Rear 11.5 in. x .2 in. (292 mm x 5.1 mm)
o Anti-lock Braking System Optional

Suspension Travel:
o Front Wheel 3.86 in. (98 mm)
o Rear Wheel 2.13 in. (54 mm)

PERFORMANCE
Engine Torque5 (per J1349):
o North America 99 ft. lbs. @ 3000 RPM (135 Nm @ 3000 RPM)

Lean Angle (per J1168):
o Right 29°
o Left 29°
Fuel Economy6
(EPA urban/highway test) 42 mpg (5.6 L/100 km)