Harley-Davidson Police Road King, 2013

Harley-Davidson Police Road King. 2013. Vivid Black. 103 cubic inches. I bought this bike brand new in September 2013. I did the following modifications and enhancements: - I changed the Police Saddlebags to the OEM Harley-Davidson Touring Saddlebags with OEM HD liners (removable bags). - The rigid Rour-Pak mount was modified by a Custom Shop so the detachable passenger backrest can be easily installed and removed and then the Tour-Pak can be installed. - A Harley-Davidson Touring Bag. P/N 93300004. that securely installs on the rigid Rour-Pak mount - A Burly Easy Boy Light Clutch was installed by the HD dealership that made the clutch very comfortable to operate. - I upgraded the OEM Rear Shocks and front fork springs to the Progressive 444 Series Rear Shocks and Progressive Front Fork Springs Kit which made the ride very comfortable and stable. - I installed Mustang Summit One-Piece Vintage seat with built-in Receiver for the driver’s backrest and a matching Mustang wide 14”x9” passenger backrest. Both you and your passenger will experience the peak of comfort with the Summit Super Touring seat. The one-piece "Super" comfortable touring design provides the rider and passenger with the fullest. most comfortable seat possible. The 19" wide Super front bucket sits the driver 1. 75" further back than the stock seat. The passenger seat is a full 16" wide and fits perfectly with the Rushmore speakers and Tour-Pak. Seat will fit with a handrail. Receiver for the optional driver backrest is built into the seat. P/N: 76860 (On the listing pictures you see the previously installed Mustang two-piece seat) - Klock Werks Flare 16” windshield - Harley-Davidson Auxiliary Lighting Bracket Kit. P/N: 69227-04A. Chrome - Harley-Davidson Bullet Rear Turn Signal Light Bar Kit. P/N:68617-04. Chrome - For the additional comfort I installed: 1. Kuryakyn Extended Brake Pedals: The answer to more leg room on floorboard equipped H-D Models! Levers move the location of the brake pedal pad forward and down while flattening the angle of the pad. Now your foot is no longer “under” the brake pedal. resulting in easier and more natural braking. All levers are beautifully polished and chrome-plated steel. They have a bronze bushing with a grease fitting for smooth operation and long life. 2. Kuryakyn Extended Girder Shift Lever: This chrome beauty will give you a lot of additional room on the floorboard. With an 8” length. it’s about 1-3/4” longer than a stock Touring or FLST shift lever. Works as both front or rear on floorboard equipped Harleys. The perfect complement to our Extended Girder Brake Pedal. 3. Kuryakyn Floorboard Relocation Brackets for Driver Boards: Repositions driver boards out 1" and forward 1" from stock location. Makes a noticeable difference in comfort; thighs aren't as tight against the tank. right knee is not as tight against the air cleaner. and legs get to stretch out a little bit more. 4. Harley-Davidson Extended Reach Rider Footboard Pans. Traditional Shape Part Number 50409-04. This kit extends the rider footboard forward of the stock location by one inch. providing the tall rider a comfortable riding position. Traditional Shape design. The bike has always been stored in the garage. was serviced in the Harley-Davidson dealership. The bike has the transferable H-D warranty. which covers all mechanical issues plus a road hazard issues. like damaged tires and rims. This warranty is good until 2016.