2009 Honda Crfr 450

I am selling a 2009 Honda Crfr 450 with all the spare parts I have such as 3 sets of plastic, eat and everything you see in the pictures. I have broken this bike down to the frame and rebuilt it. This engine has less than 15 hours on it because I had a spare engine that I used for a few years. I have receipts from the major work that I had done for the suspension and motor work. But before I get into the description I ll go ahead and list everything that is done. I had the motor done at the beginning of this year when I put a fresh engine in. I also have video of bike being dynoed tuned By Randy Mann. I kept this bike clean and running perfect. This bike is strong and pulls like a champ. But here everything Ive done at the beginning of this year.
Engine-5 angle valve job done by Randy "Fastmann Racing" Mann.
Custom Dynotune by Randy "Fastmann" Mann.
Moose racing 13.5:1 Racing Piston .
Hinson Racing clutch plates and springs
Yoshimura header and exhaust
Hammer head shifter
Suspension- Re-valved front fork tubes for 190 lb ride with 4.8 N/MM spring from Factory Connection. The spring was one step up in stiffness from stock. I have 1 of the receipts showing all work that was done by FC.
Front fork tubes and rear shock shaft DLC coated by Factory Connection.
Rear spring from Factory Connection and over flow rear bladder.
I replaced all rear linkage and swing arm bearings with Pivot bearings at the beginning of this year.
Pro Circuit Rear linkage
Works Connection Cutch perch and new clutch cable.
Renthal Twin wall Carmichael bend handlebars.
Renthal grips.
Renthal chain, 3 tooth front and 50 tooth rear sprocket.
Applied Top and bottom Triple clamps, ar mounts, olts and bushings.
Extra set of Complete black and red wheels with Pirelli Scorpion tires except with NO rotors or sprocket.
CV4 radiator hoses with oversized polished radiators with 3 EXTRA sets of radiators.
EBC oversized front brake rotor and EBC rear rotor.
Boyeson Water pump and impeller
Tsunami air box
Acerbis full skid plate.
Black powder coated frame and swingarm.
Yosimura brake clevis
Black B4 seat cover.
Twin air powerflow Air filter kit.
Custom graphics with white Acerbis plastic kit.
If you have any questions please email me. I will deliver up to 30 miles. Buyer responsible for remainder of shipping.