1920 INDIAN DAYTONA BOARD TRACK RACER REPLICA BY SCOTT WEISS

CUSTOM BUILT 1920 INDIAN DAYTONA board track racer replica. The forks have been lengthened to allow for the look of the leaf spring suspension. The frame was then cut apart to be lengthened; new tubing was bent. and then put back together. The fuel tank will hold well over one gallon of pre-mixed fuel. The tank is made out of 14 gage sheet steel with a tank liner put in after it was done so there will be no corrosion in the years to come. The seat has been reformed to fit the bike and the handlebars were custom bent and zinc plated with vintage looking coke bottle grips to give you the look and ride from that time period. The motor is a two stroke 80cc with a custom air intake and a billet high compression head which is a nice upgrade. This motor has needle crank arm bearings. high performance crank bearings. and a high performance carburetor. This board track racer is still in its break in period and after that it will run about 35 – 38 mph. I have ridden this bike for about 10 miles and every time I ride these bikes I draw a lot of attention – these bikes are a blast to ride or be on display. This bike is a true piece of art! It has countless hours on the paint to give it a patina look. I have been doing this kind of work for 28 years and no two bikes that I build are the same. I take great pride in building these bikes. If you have any questions feel free to contact me! Thanks for looking!