2012 Kawasaki ZX14R Great Condition Low Miles ZX14 Sport Bike Motorcycle

2012 Kawasaki ZX14R

- Low Miles

- Excellent mechanical condition.

- Comes exactly as show in the photos This bike has not been wrecked or layed over. Does have some minor scratches from use.

Buying Requirements:

Buyermust sign paperwork here at thedealership andtake ownership ofthebike here. Weare not allowed toship it.

We are located in Western Arkansas.Approximately 2.5 hours west of Little Rock or 1 hour south of Fayetteville.

Buyermust place a non-refundable $500 deposit within 2 days of close of listing. We will accept Pay-Pal Visa MasterCard or Discoverfor the deposit only. The remainder of the balance is due when thebike is picked up and must be paid by cash orcashier's check unless other arrangements have been made.

We Do Not accept out of state personal checks.

Financing is available. Please call before buying.

Customerwill pay their sales tax in their state when they register the bike.

Thisbike is for sale on our showroom. We reserve the right to end thelisting earlyupon its selling here before thelisting ends.

Contact information:

Contact any of ourSalesAssociatesat the following:

Phone: 479-646-7377

Factory Specifications:

Engine Configuration Inline Four 4-Stroke

Engine Displacement 1441 cc

Engine Cooling Liquid

Compression Ratio 12.3:1

Combustion Chamber Design Pentroof

Valves Per Cylinder 4

Intake Valves Per Cylinder 2 (Steel)

Exhaust Valves Per Cylinder 2 (Steel)

Bore x Stroke 84 mm x 65 mm

Conecting Rod Length

(center-to-center) 115.5 mm (4.5 Inches)

Connecting Rod Material Chrome-molly Steel

Claimed Peak Horsepower 207 bhp @ 10000 rpm

Claimed Peak Torque 122.2 lbs. - ft. @ 7500 rpm

Engine Redline 11000 rpm

Valve Angle (Included) 12 degrees Intake/ 13 degrees Exhaust (25 degrees)

Combustion Chamber Volume 36 cc

Valve Train Type DOHC Shim-under-bucket Lash Adjustment

Valve Adjustment Interval 15000 miles

Intake Valve Diameter 33.4 mm

Exhaust Valve Diameter 28.3 mm

Intake Valve Stem Diameter 5.0 mm

Exhaust Valve Stem Diameter 5.0 mm

Intake Valve Maximum Lift 9.3 mm

Exhaust Valve Maximum Lift 9.3 mm

Intake Valve Timing

Open BTDC 34 degrees

Close ABDC 72 degrees

Duration 286 degrees

Exhaust Valve Timing

Open BTDC 66 degrees

Close ABDC 36 degrees

Duration 282 degrees

Valve Timing Measuring Point 0.25mm Intake 0.30mm Exhaust (lift)

Fuel Delivery System Mikuni Digital Fuel Injection

Throttle Body Venturi Size 44 mm

Air Filter Type Pleated Paper Element

Exhaust System Type 4-2-1 (Stainless Steel)

Ignition System Digital

Lubrication System Wet Sump

Oil Capacity 4.9 quarts (4.6 liters)

Fuel Capacity 5.8 gallons (22.0 liters)

Transmission Type 6-speed Constant Mesh

Clutch Type Multi-plate Wet Back-torque-limiting

Clutch Actuation System Hydraulic

Clutch Spring Type Coil

Number Of Clutch Springs 6

Number of Clutch Plates 19

Drive Plates 10

Driven Plates 9

Primary Drive Gear (Straight-cut)

Primary Drive Gear Teeth (Ratio) 84/54 (1.556:1)

Final Drive Sprocket Teeth (Ratio) 42/17 (2.470:1)

Transmission Gear Teeth (Ratios)

6th 29/28 (1.036:1)

5th 30/26 (1.154:1)

4th 32/24 (1.333:1)

3rd 34/22 (1.545:1)

2nd 37/19 (1.947:1)

1st 46/18 (2.611:1)

Transmission Overall Ratios

6th 3.980:1

5th 4.434:1

4th 5.124:1

3rd 5.939:1

2nd 7.484:1

1st 10.035:1