2013 YZ250 with EG295 kit - 27.4 hours

2013 YZ250 with an Eric Gore (Forward Motion/Millenium Technologies) 295 big bore with the Mo Betta porting. Overall more horsepower over the entire rev range. Also have a Moto Tassinari intake reed block and Sunline footpegs. Air filter always kept clean. oil changed every 2 rides. Stock suspension. Bike has 27. 4 hours total. big bore went in at 7 hours. Runs perfect. lots of power. Hour meter installed before I ever started it. and I bought this bike brand new. Chain and sprockets are about 5 hours old. and is the "dirt tricks" lightweight steel sprocket. Gearing is stock 50 tooth rear. Titled in Florida. but it's in Wisconsin now. Bike is not wrecked and is perfectly straight. Suspension is good. no leaks. No tears in the seat. no dents in anything. There's a scratch on the front fender where I had an issue unloading the bike from my pickup. I'm an older guy and this seems to happen once in a while. Don't go fast enough to wipe it out bad. roll most jumps but have a good time. I've got a KX450 now so this has to go. No reserve auction. high bidder gets the bike. Call or text 920-882-8097 with questions. I will meet your shipper at my house if you chose to do that. otherwise come and pick it up. You are welcome to come look at it ahead of time and take it for a test drive down my driveway. just be careful. front end comes up quick. Thanks for looking.