1984 Chevrolet Corvette Z51 C4
1984 Chevrolet Corvette
Chevrolet Corvette 1984 technical specifications | |
---|---|
Condition: | Used |
Item location: | Fairmount, Illinois, United States |
Make: | Chevrolet |
Model: | Corvette |
Type: | Hatchback |
Trim: | Base Hatchback 2-Door |
Year: | 1984 |
Mileage: | 78,000 |
VIN: | 1G1AY0784E5142184 |
Color: | Black |
Engine size: | 5.7L 350Cu. In. V8 GAS OHV Naturally Aspirated |
Number of cylinders: | 8 |
Power options: | Cruise Control, Power Locks, Power Windows, Power Seats |
Fuel: | Gasoline |
Transmission: | Automatic |
Drive type: | RWD |
Interior color: | Gray |
Options: | CD Player |
Vehicle Title: | Clear |
You are interested? | Contact the seller! |
Description |
---|
1984 chevy corvette that was in a front end collision. Car could either be repaired or used for many good parts. It starts and drives, but the radiator leaks. Car runs very good. Many things have been done over the years of ownership. Paint is faded, but fiberglass is in good condition. The passenger door has a little damage where the hood pushed into it, and the windshield is cracked.
It has the following done to the engine:
- stock 350 lower end with around 80,000 miles on it.
- brodix 180 IK series aluminum heads, which raised the compression to 10.4:1
- isky 270/280 camshaft with rhoades lifters
- headman ceramic coated headers
- crossfire intake manifold that was ported out to match heads, and egr was removed.
- 2 inch throttle bodies
- EBL custom computer tuned for modifications. Call me, and I can tell you everything that was done.
- Wide band O2 sensor that automatically sets fuel at whatever ratio you program for.
- a/c removed
- air pump removed
- Aeromotive fuel regulator to adjust fuel pressure. Computer is tuned for current fuel pressure set at 18 lbs.
Other things that are done to car
- wheels were redone, and look like new
- Strange engineering 3.73 gearing in rear end
- transmission weights changed so it shifts at higher rpm.
- factory oil cooler
- custom built exhaust that is 2.5 duals with flowmaster super 44's.
- bilstein shocks
- VBP Heavy duty Toe Rods (rear)
- Z51 handling package
- 700r4 transmission
- Uncommon factory cloth sport seats.
- Brand new outer door window seals.
- MSD Ignition and Taylor wires.
Many extra parts, including extra set of wheels and all the original parts that were replaced on the car, such as the heads, exhaust manifolds, original intake manifold, and many other parts.
Please email me with any questions.
Thank you.
It has the following done to the engine:
- stock 350 lower end with around 80,000 miles on it.
- brodix 180 IK series aluminum heads, which raised the compression to 10.4:1
- isky 270/280 camshaft with rhoades lifters
- headman ceramic coated headers
- crossfire intake manifold that was ported out to match heads, and egr was removed.
- 2 inch throttle bodies
- EBL custom computer tuned for modifications. Call me, and I can tell you everything that was done.
- Wide band O2 sensor that automatically sets fuel at whatever ratio you program for.
- a/c removed
- air pump removed
- Aeromotive fuel regulator to adjust fuel pressure. Computer is tuned for current fuel pressure set at 18 lbs.
Other things that are done to car
- wheels were redone, and look like new
- Strange engineering 3.73 gearing in rear end
- transmission weights changed so it shifts at higher rpm.
- factory oil cooler
- custom built exhaust that is 2.5 duals with flowmaster super 44's.
- bilstein shocks
- VBP Heavy duty Toe Rods (rear)
- Z51 handling package
- 700r4 transmission
- Uncommon factory cloth sport seats.
- Brand new outer door window seals.
- MSD Ignition and Taylor wires.
Many extra parts, including extra set of wheels and all the original parts that were replaced on the car, such as the heads, exhaust manifolds, original intake manifold, and many other parts.
Please email me with any questions.
Thank you.