1966 mustang c code convertible pony interior

I purchased this 1966 Mustang C code car in restorable condition back in April 2007 from Wrightsville Beach N.C.. I imported it into Canada and began the restoration work and evaluation. The car had been sitting outside, nd the interior and floor were pretty rough ( as with most Mustangs ), he bonus was the rails front and rear, long with the shock towers inner and outer rockers, orque boxes were all in really good shape ( in my opinion ). The floor extensions and most of the body were also quite reasonable. I stripped the car down, nd replaced 4 floor pans and made some floor metal repairs. I replaced the trunk floor and installed a new gas tank. I replaced a passenger lower 1/4 and repaired the original doors and fenders ( well the ones which came with the car ). I also re-used the trunk lid and hood. In the front I installed new springs, hocks and upper and lower ball joints, nd much of the steering gear joints and parts. Brakes all around and all new lines and the like ( way too much to mention ) I did the whole interior including new pony interior seat foams in front. Many if not all the dash gauge bezel, nd knobs etc. were changed for new pieces. Most of the chrome trim, un visors, oor panels, ody trim badges and the like all changed new. When I bought the car the engine was already replaced with a 302 ( early one sorry I don't remember which year I think 67 ) I freshened the motor with new timing chain, nd an aftermarket cam shaft. New dual exhaust installed with the GT valence and rings in rear. I also upgraded to the fog light grill in front New 16 inch tires and wheels ( American Racing )...Now the bad stuff, never replaced the top as I didn't intend to ever use in wet weather, never replaced the cowl and like all of them it leaks ( I will include a cowl cover with car ), he paint turned out horribly, rom 10 foot and in these pictures it looks ok, ut it has orange peel in the clear and some runs as well, he doors and fenders were never properly set so the gaps are not nice. The rear seat was recovered however the original frame is in rough shape and makes using rear seat very uncomfortable if not totally useless. The car has had limited to no use since completing work in Fall 2007. It has sat and some areas have weathered worse than others. That said it is still a 66 pony interior C code Mustang convertiblewith power top.The rails and floor are all still in excellent condition ( my opinion of excellent ) The interior mostly excellent, ngine fires right up, ar drives, rans rear seal leak though. Overall a light project which would consist mostly of redoing the paint, lignment, nd some small misc. items, nd a new top if desired. Aprox. $20,000.00 was spent just on parts to get the car to this point not counting labour or the car. I have the original door tag it reads 76B T F3 o7J 22 6 6 this equals conv. Pony Interior, andyapple Red, archment crinkle vinyl with burgundy appointments Pony Interior, ept. 07 196, harlotte, .80:1 conventional C4 automatic. So a great pedigree as well. Please ask questions come see car everybody's evaluation is different, am hiding nothing and am trying to describe to the best of my abilities. I have included many pictures, ut pictures tend to look better than in person. Well worth the investment and time to come see this one. Good luck and happy bidding, must downsize the fleet !