2012 Mustang Boss 302 Car Number 6 (0006) Race Track Setup -Yellow - Prvt Seller
2012 Ford Mustang
Ford Mustang 2012 technical specifications | |
---|---|
Condition: | Used |
Item location: | Okeechobee, Florida, United States |
Make: | Ford |
Model: | Mustang |
Trim: | boss 302 |
Year: | 2012 |
Mileage: | 9,500 |
VIN: | 1ZVBP8CU5C5200572 |
Color: | Yellow |
Engine size: | 302 V8 |
Number of cylinders: | 8 |
Fuel: | Gasoline |
Transmission: | Manual |
Drive type: | RWD |
Interior color: | Black |
Safety options: | Anti-Lock Brakes, Driver Airbag, Passenger Airbag |
Vehicle Title: | Clear |
You are interested? | Contact the seller! |
Description |
---|
2012 Boss 302 car number 0006, rdered from FL dealer, riginal owner. option Recaro, orsen Differential
Second car built on the second day of production and second car built in yellow. 1ZVBP8CU5C5200572
Current paint is like picture 4 and , nlike the pictures with a complete blacked out tiger hood. The stripes are 1969/2012 style in matte black. The last picture was new at the dealer.
Car comes with original owners kit complete.
9600 miles (about half on track) car has run 2:26 at Sebring and 2:05 at Daytona on used take-off Conti/Hoosier slicks but can run faster with a better driver then me. Below is a list of add ons, ods and extra parts, here is more but this is all that comes to mind at the moment. Car comes with everything listed including things like the Traqmate system and the original parts. The car can be put back to mostly original. To complete making it a track car it needs a full cage, all rear wing and racing wiring harness.
Setup as track car, ll items listed below included along with all original parts except, ear seat back, ear seat bottom, -pipe, ide exhaust.
Engine
Ford Racing 12 Quart Oil Pan
PCV delete, ustom Peterson canister setup
Solid Motor Mounts
Cat delete with tune (tuner included) Straight pipes
K&N Air Filter in original air box
Battery relocated to trunk
Ford Racing replaced head on left side, resh Ford Racing springs on right head.
New Style Shelby Electric Fan M-8C607-MSVT
Boss 302S Radiator
X Pipe
Track Key installed and stored in tuner
AC delete but have all parts w/ new in box compressor
Drive train
Tremec Transmission with active reverse lookout switch installed in cockpit
5TH gear swapped out to .80
Steeda Tremec shifter
Exedy Hyper Single Clutch same as used in Grand Am cars
2 Aluminum Driveshafts
Trans Cooler, ot currently installed with the coilovers
High Volume Clutch Line Upgrade
Rear axle overflow, ine to trunk mounted Allstar canister
Has custom skid plate for lower radiator protection and cooling.
Ford Racing Rear Diff Cover Tapped For Oil Changes (original also included)
Suspension and Brakes
Complete Ford Racing Front and Rear Setup, 02S Control Arms M-3075-RA and M-5649-S Adjustable Panhard etc.
Ford Racing Bump Steer Kit
Koni Coilovers (from The Koni Challenge Grand Am Car) Weighted and Balanced by 2 Different Grand Am Racing Teams
Brembo Racing Front Brake Setup (off Grand Am race car)
Upgraded OEM Rear Brake Calipers 13 Shelby Style
ARP Studs front and rear
Ford Racing Brake Cooling Ducts
Boss 302S ABS control Modual
Stainless steel brake lines
18mm Ford Racing rear sway bar on car
Ford racing front adjustable front sway bar
Max Motorsports Camber Plates
Fresh Front Ford Racing Hubs
Tires wheels
In addition to the factory set I have two complete sets (Eight) of Ford Racing 18x9.5 Shelby rims M-1007-DC1895 with real time pressure and temp sensors installed including two in car screens.
One set (4) 18x10 Shelby look alike Rims
Extra Slicks
Body
Roof Painted to Match Car
Blacked Out Decklid
Tiger Carbon Fiber Hood with 4 Hood Pins
Max Motorsports Rollbar
Crow 6 Point Harnesses
Multimatic Front and Rear Tow Hooks
Ford Racing Front Bumper Bar
Custom Splitter
Custom Flat Black Striping
Boss LS Rear Style Spoiler
Splitter Bracket (not in use, umper bar has mounts)
Boss 302S Grille Cut Out for Max Air Flow (have original unmolested painted grille)
Extras items included
Data Acquisition Traqmate System with Gopro ready to go
Shift Light
Extra Wide Gas Pedal for Heal Toe
Full Set of Ford Racing P Springs to use with Original Shocks/Struts
22mm Ford Racing sway bar
Several sets of Brembo Two Piece front rotors, ome new ($900-1000 set)
Several set of Hats and at least 5 sets of 25mm Brake Pads
Extra Sets Conti Racing Slicks
Window sticker and all documents from new
Original owners kit
All original parts, rom wheel studs to spoiler and MT82 trans, verything except:
rear seat bottom and back, -pipe, ide pipes, ear brake calipers, ide stripes but have two new original rear quarter stripes, ave original hood has small dent about the size of a quarter in front.
No LE please
Second car built on the second day of production and second car built in yellow. 1ZVBP8CU5C5200572
Current paint is like picture 4 and , nlike the pictures with a complete blacked out tiger hood. The stripes are 1969/2012 style in matte black. The last picture was new at the dealer.
Car comes with original owners kit complete.
9600 miles (about half on track) car has run 2:26 at Sebring and 2:05 at Daytona on used take-off Conti/Hoosier slicks but can run faster with a better driver then me. Below is a list of add ons, ods and extra parts, here is more but this is all that comes to mind at the moment. Car comes with everything listed including things like the Traqmate system and the original parts. The car can be put back to mostly original. To complete making it a track car it needs a full cage, all rear wing and racing wiring harness.
Setup as track car, ll items listed below included along with all original parts except, ear seat back, ear seat bottom, -pipe, ide exhaust.
Engine
Ford Racing 12 Quart Oil Pan
PCV delete, ustom Peterson canister setup
Solid Motor Mounts
Cat delete with tune (tuner included) Straight pipes
K&N Air Filter in original air box
Battery relocated to trunk
Ford Racing replaced head on left side, resh Ford Racing springs on right head.
New Style Shelby Electric Fan M-8C607-MSVT
Boss 302S Radiator
X Pipe
Track Key installed and stored in tuner
AC delete but have all parts w/ new in box compressor
Drive train
Tremec Transmission with active reverse lookout switch installed in cockpit
5TH gear swapped out to .80
Steeda Tremec shifter
Exedy Hyper Single Clutch same as used in Grand Am cars
2 Aluminum Driveshafts
Trans Cooler, ot currently installed with the coilovers
High Volume Clutch Line Upgrade
Rear axle overflow, ine to trunk mounted Allstar canister
Has custom skid plate for lower radiator protection and cooling.
Ford Racing Rear Diff Cover Tapped For Oil Changes (original also included)
Suspension and Brakes
Complete Ford Racing Front and Rear Setup, 02S Control Arms M-3075-RA and M-5649-S Adjustable Panhard etc.
Ford Racing Bump Steer Kit
Koni Coilovers (from The Koni Challenge Grand Am Car) Weighted and Balanced by 2 Different Grand Am Racing Teams
Brembo Racing Front Brake Setup (off Grand Am race car)
Upgraded OEM Rear Brake Calipers 13 Shelby Style
ARP Studs front and rear
Ford Racing Brake Cooling Ducts
Boss 302S ABS control Modual
Stainless steel brake lines
18mm Ford Racing rear sway bar on car
Ford racing front adjustable front sway bar
Max Motorsports Camber Plates
Fresh Front Ford Racing Hubs
Tires wheels
In addition to the factory set I have two complete sets (Eight) of Ford Racing 18x9.5 Shelby rims M-1007-DC1895 with real time pressure and temp sensors installed including two in car screens.
One set (4) 18x10 Shelby look alike Rims
Extra Slicks
Body
Roof Painted to Match Car
Blacked Out Decklid
Tiger Carbon Fiber Hood with 4 Hood Pins
Max Motorsports Rollbar
Crow 6 Point Harnesses
Multimatic Front and Rear Tow Hooks
Ford Racing Front Bumper Bar
Custom Splitter
Custom Flat Black Striping
Boss LS Rear Style Spoiler
Splitter Bracket (not in use, umper bar has mounts)
Boss 302S Grille Cut Out for Max Air Flow (have original unmolested painted grille)
Extras items included
Data Acquisition Traqmate System with Gopro ready to go
Shift Light
Extra Wide Gas Pedal for Heal Toe
Full Set of Ford Racing P Springs to use with Original Shocks/Struts
22mm Ford Racing sway bar
Several sets of Brembo Two Piece front rotors, ome new ($900-1000 set)
Several set of Hats and at least 5 sets of 25mm Brake Pads
Extra Sets Conti Racing Slicks
Window sticker and all documents from new
Original owners kit
All original parts, rom wheel studs to spoiler and MT82 trans, verything except:
rear seat bottom and back, -pipe, ide pipes, ear brake calipers, ide stripes but have two new original rear quarter stripes, ave original hood has small dent about the size of a quarter in front.
No LE please