1995 Mazda 626 Modified Tuner Car Many Mods Rebuilt 2.0 FS JSPEC 2.0L 95 Probe

Up for sale is my 1995 Mazda 626. It's been my project car and my summer daily driver. I've been through or made upgrades to almost all of it: suspension, engine, transmission, interior. Full comprehensive list of upgrades and modifications below.

I would say I'm about 85% to where I wanted to get it. I haven't been able to get where I wanted it because the last few years of living in apartments and having no garage. Now I'm moving across country and can't take it with me, so it must go.

Below is the list of work that's been done to it, what still needs to be done, and what items are included w the car. I've tired to be as thorough as possible as I hate to have surprises when I show up to see a car, so please read carefully.

Over $5,000 invested.

Feel free to ask any questions on this fun little car to drive. If you want to come over and view the car before bidding I should be able to work that out. Thanks for looking.

NO RESERVE

What has been done

Engine

• Rebuilt 2.0L FS motor in Summer of 2009; apx 25,000 miles since rebuild
• Apx 25,000 miles on motor since
• Japanese Domestic Market (J-SPEC, FS-ZE) (Stock bore) (compression) pistons (runs on premium fuel only)
• New Press Pins installed at machine shop
• New Oil Pump from Mizumo Automotive
• Head Bolts from Mizumo Automotive
• Main Rod Bearing Ring Gasket set from Mizumo Automotive
• 5W30 Royal Purple since rebuild
• Headwork does at Austin Jordan Engines in Wyoming, MI
• Rull recon: valves, seats, seals, grind, deck, guides
• Water pump
• NGK Ignition Wires
• Bosal Header
• Custom Cold Air Intake with cone filter
• Rear main bearing
• R&R Poly Engine Mounts
• New MAF Sensor
• New O2 Sensor
• Exhaust Catalytic Converter, Lawson muffler, 2.25” cat-back exhaust professionally installed

Transmission

• 5-Speed MTX installed
• South Bend Clutch Stage 2
• Flywheel Resurfaced and shimmed (all specs included)
• Corksport Stainless Braided Clutch line
• Clutch/Brake Master Cylinder
• Axles

Brakes and Suspension

• 4 wheel disc brakes, rear brakes converted to disc
• Tokico HP Gas Shocks
• New strut mounts and cushions
• B&G lowering springs
• AWR Racing rear anti-sway bar
• Front Strut Tower Bar
• New rear brake calipers
• 2003 Mazda3 17” Stock Rims
• 2 New outer tie rod ends
• Lower control arm bushing, front
• Lower control arm bushing, left rear
• Lower ball joint
• New anti-sway bar links

What Needs to be Done

• There is body work that needs to be done: Spots of surface rust on outiside, inside of LH rear door. (see pictures). Rocker panels are rusted through in a couple spots. Front right fender had been dented in before I got it, should be banged out. Needs new front bumper cover (included) installed
• There is a sputter in the top range of each gear, my thought was that the computer is from an ATX and isn't giving proper fuel when car is reved over normal RPM. I was either going to get a MTX computer from the junk yard or off of eBay or a Mega Squirt II piggy back computer.
• Needs new tires, alignment
• Two rims need to be cleaned up
• Brake line leak
• Oil leak
• Due for oil change
• I was going to install 2 new Mazdaspeed cams. Obviously this doesn't have to be done, but would be a nice little upgrade.
• Spot/stain on passenger's seat
• Gas door fitment isn't correct, problem with hinge, different gas door included
• Sometimes the trunk leaks water, hadn't been able to figure this out yet, weatherstripping is all good
• Had installed new parking brake, but hasn't been used in a few years
• Needs front right side mud flap

***After auction reaches $1,000 I will bring to shop to find oil leak and brake line leak and pay for repair up to ($200) and complete oil change, also have them check top range sputter, will report my findings on the auction.***

What Comes With It

• Brand new front bumper cover
• Brand new running fog light assembly from 2000 Mazda 626. Includes new wiring harness
• New air filter still in box
• New front bumper side light lenses - clear
• Ralco short-shifter
• New leather shift boot
• Gas door (needs to be painted to match)
• Haynes manual, Hayes Body Electrical Troubleshooting Manual, 1994 Mazda 626 Workshop Manual
• Notes and receipts from upgrades/repairs
• Other assorted left over parts