1969 Toyota Land Cruiser with GM 5.3L Vortec (LM7) V8 - Only 10k miles on build.

Attention badasses!Not to bereckoned with, his MONSTER 1969 Toyota FJ40 with a BD Turnkey 5.L Chevy Small block LM7 engine with a stage 2 structural frame off build to handle its MASSIVE torc is up for sale.This LandCruiser will make a great daily driver, eekendfunmobile, r a unfuckwithable tank for climbing over anything in the upcoming zombieapocalypse.Thedonor body has less than 10k miles since the build. Please study the build thread and feel free to give me a call with any questions!917-655-3906 (my name is Francis and text is also fine) The truck is currently parked in Los Angeles and ready for pickup.
Here is the actual engine in the truck before deliver on the Dyno:https://www.youtube.com/watch?v=EXhIbxY09ro
Basics:
Drivetrain

GM 5.3L Vortec (LM7) V8 86k miles on the clock (have carfax from donor vehicle)

GM 4spd SM420 trans

(3 speed) transfer case

Newly balanced drive shaft with new OEM U-joints

4.11 gears in both axle.

Brakes

4 wheel power ABS disk brakes

Suspension/Steering

2" Specter Offroad Body Lift

New body bushings throughout

Man-A-Fre 4+ Anti-Inversion shackles front/rear

Man-A-Fre U-bolt flip kit front and rear

Rancho 2 1/2 Suspension lift

Wheels/Tires

Chrome Mickey Thompson wheels in good condition (no rash)

33.x10.50 BFGAT's (approx. 250 miles on them)

IDIDITtilt steering column

Saginaw Power Steering Conversion

Other upgrades:

Painless wiring harness

weatherpack connectors used throughout

Aluminum 4 core radiator with electric fans and custom fan shroud

Autometer guages

Full BestTop soft top

Bikini Top

New steel replacement stock style fuel tank.

Audio:

12-inch Marine grade wake-board speaker with 10" sub

blue-tooth and USB ready head unit mounted in the gloved box.

Complete Build Thread:

***Bolts:***

Flywheel Bolts (ARP 330-2802):

http://www.summitracing.com/parts/ARP-330-2802

Pressure Plate bolts (ARP 134-2201)

http://www.summitracing.com/parts/ARP-134-2201/

Bellhousing bolts (black, lass 10.9, ought at local hardware store)

M10x1.5x45mm (4)

M10x1.5x70mm (2)

Gen1 SBC motor mount bolts (ARP 130-3102)***

http://www.summitracing.com/parts/ARP-130-3102

(***If you use the AA motor mounts you will get all the hardware you need included. I just had these laying around and decided to put them in)

***Clutch/Flywheel Etc.***

Flywheel:

http://www.summitracing.com/parts/MCL-460535

Pilot Bushing:

http://www.summitracing.com/parts/MCL-8617

Clutch Kit:

Sach's K5473-01

http://www.amazingsavingsautoparts.com/index.php?action=item&id=8816847

Advance Adapters Clutch Slave Cylinder Bracket PN 716287

http://www.advanceadapters.com/prod...nder-bracket-for-use-with-chevy-bellhousings/

Advance Adapters Clutch Slave Cylinder (longer throw than stock)

http://www.advanceadapters.com/products/716213--toyota-land-cruiser-slave-cylinder/

Advance Adapters Clutch Fork PN 716176

http://www.advanceadapters.com/products/716176--gm-cast-iron-release-arm/

Advance Adapters Release Arm Wedge PN 71639

http://www.advanceadapters.com/products/716139--gm-release-arm-wedge/

.

AA Adapter plates (My rig previously had a sbc in it so it already has AA sbc motor mounts in it.)

http://www.summitracing.com/parts/ADD-713088-P

Advance Adapters Block Hugger Headers for LSx engines.

P/N 717043-HDR

***Please Verify PN's on your own before ordering***

1998-2002 Camaro LS1 Oil Pan: 12628771

windage tray: 12558253

Oil Pump Pickup: 12558251

Oil dipstick tube: 12551577

Oil dipstick: 12551581

Oil pump pickup "O" ring: 12557752

GM metal exhaust gaskets (sold individually): 12617944

Autometer NPT to Metric adapter (if using port on cylinder head for temp guage)

ATM-2277

Autometer Cylinder head Temp Sender (these are shorter than the normal sender and must be used if using the metric adapter) This is for the short sweep electric guages.

ATM-2259

Seals-it brand Grommet PN GS404-16

.

Vetteworks LS1 style fuel pump mounting ring,

http://www.vetteworksonline.net/cat...ducts_id=89&osCsid=vbhh9mvp5d22e6g97bjp0reud4

LS1 Fuel pump.

http://www.vetteworksonline.net/catalog/product_info.php?cPath=9&products_id=108

3/8 fuel line to -6 AN adapter (for the fuel pump) fittings (2)

http://www.summitracing.com/parts/rus-644123

-6AN to -6AN female/female coupler fitting (2) (from pump -6 to fuel filters both inlet and outlet)

http://www.summitracing.com/parts/rus-640001

40 Micron 6AN inlet/outlet fuel filter (have one for supply and return) (2)

http://www.summitracing.com/parts/rus-650133

20ft 6AN PTFE lined hose

http://www.summitracing.com/parts/sum-220985

6AN Summit PTFE straight hose ends (4)

http://www.summitracing.com/parts/sum-220141

33-240OHM Autometer ultralight fuel guage (1)

http://www.summitracing.com/parts/atm-4316

.

Champion Radiator 4 core aluminum radiator PN: MC180

http://www.championradiators.com/Toyota-Land-cruiser-radiator

G&M Honest Performance Fan Shroud (local deal only)

Lower Radiator Hose Gates PN 21356 (1991/2 Ford Probe & Mazda MX6 and 626)

Upper Radiator Hose (1997 Dodge Dakota w/4cyl engine)

.

460 piece weatherpack kit

http://www.amazon.com/gp/product/B005OS5DEG/ref=oh_details_o01_s00_i00?ie=UTF8&psc=1

Weatherpack crimping tool

http://www.amazon.com/gp/product/B002CCAEJ6/ref=oh_details_o00_s00_i01?ie=UTF8&psc=1